MUXlog R is a tool used to record the activity of CAN and LIN vehicle buses, with a triggering capability due to a sequence of programmed events (network and/or external). It features an internal clock activated wake function, a high-speed CAN activated wake function and a controlled power output.
Mplug MUXlog is a connecting box for the MUXlog product of NSI. It comprises information available for a slot of MUXlog.
Mplug MUXlog gives to the user the possibility of connecting tools via 4mm female connectors and SUBD 9 pins, such as for example an analyzer CAN, an oscilloscope, etc….
MUXy diag is connected to a vehicle's OBD link and, in standalone mode, runs diagnostic request scripts configured on a PC. The results are transmitted to a CAN bus for processing by an analysis tool such as a data logger or analyser.
Two high-speed CAN lines, three K lines. Embedded software downloadable to flash memory.
Mplug OBD is a box used for SAE J1962 connector present on any current motor vehicles.Mplug OBD gives to the user the possibility of connecting tools on the OBD connector of the vehicle, as for example an analyzer CAN, an analyzer ISO9141, an oscilloscope, etc., through typical connectors female base 4mm and male SUBD 9 pins.
The Bi-CAN I/O gateway can:
- convert wireline data into CAN frames,
- control actuators via CAN frames,
- create a gateway between two CAN networks ( typically 250 kb and 500 kb),
- generate analogue voltages from CAN signals.
Mplug Bi-CAN I/O is a box for the product Bi-CAN I/O of NSI. Mplug Bi-CAN I/O gives to the user the possibility of connecting electronic tools and assemblies via 4mm connectors female and SUBD 9 pins, such as for example an analyzer CAN, an oscilloscope, etc….
DataMUX is PC software package which is used to:
- configure NSI products easily by editing and downloading setups,
- perform updates by downloading the embedded software in those products,
- access product identification characteristics and versions.
4Temp-C belongs to the 4Measure product family. It is designed for the measurement of temperature with thermo-copple in extreme environment. It allows the connection of 8 thermo-couples of type K ; the measured values are sent on a CAN bus.
4Temp-CG belongs to the 4Measure product family. It is designed for the measurement of temperature with thermo-copple in extreme environment. It has a complete galvanic isolation and allows the connection of 8 thermo-couples of type K ; the measured values are sent on a CAN bus.
4Sens-CG-DMS belongs to the 4Measure product family. It is designed for the measurement of voltage and strain gauge in extreme environment. It has a complete galvanic isolation and allows the connection of 4 channels ; the measured values are sent on a CAN bus.
4Sens-CG-HV belongs to the 4Measure product family. It is designed for the measurement of voltage and current in extreme environment. It has a complete galvanic isolation and allows the connection of 4 channels ; the measured values are sent on a CAN bus.
MKT-view+ is a CAN Display for embedded instrumentation. After importing a CAN Database (DBC), it allows the display of CAN information in interpreted numerical and graphical form. MKT-view+ can send frames and react on event.
MUXtester is a portable terminal for the testing of high-speed and low CAN buses and VAN buses, featuring:
- testing of wiring integrity, electrical levels,
- testing of sleep/wake modes,
- testing of messaging and setups,
- testing in spy mode.
|
