MUXy can connect a PC directly to the OBD diagnostic connector of a multiplexed vehicle via a USB link.
MUXy manages two high-speed CAN channels and three K lines, and can be used to:
- download from in-vehicle computers via the BSI switched CAN,
- perform diagnostics via K lines or the CAN.
MUXy light is an intelligent interface for connecting a PC to a CAN bus via a USB link. The embedded software manages CAN frame segmentation and flow control in accordance with standard ISO 15765.
MUXy box can connect a PC to one or more in-vehicle buses via a USB link.
MUXy box manages two high-speed or low-speed CAN channels, two K lines, one K/L line, one LIN channel (master or slave), two logic inputs and two logic outputs.
Mplug MUXy Box is a connection box for MUXy Box.
It can be used to connect tools such as a CAN analyser or an oscilloscope by means of 4 mm and SUBD 9-contact female connectors.
CAN cards for PC are used to connect systems equipped with a bus PC of type ISA E-ISA, PC/104, PCI or PCMCIA to a CAN bus.
They are available with or without galvanic insulation and are supplied with software interfaces for Windows.
Traminator CAN is a CAN computer validation tool.It is used to generate interference controlled by a CAN bus: line breaking, connection to earth, transmission of error frames, destruction of bits, etc.
NSI527 is a communication software package supplied with the CAN cards for PC.It is used to perform quick checks on the installation of cards, and to transmit or receive frames that can be parameterised on a standard or extended CAN bus.Its functions include: frame display or counting, error counting, identifier list.
XTM is an analyzer / simulator tool for CAN, LIN and FlexRay networks. It allows the import of database CAN and LIN (DBC and LDF). XTM offers statistics, Trace, Data and Graphics windows. Scripts can be developped (test bench, node or bus simulation). It allows the developpement of a specific user interface.
Emulin is a case of test and simulation on LIN networks allowing to obtain the results of the tests directly on the case of controle, without requiring of connection to a PC.
Visualin is the analysis software associated with Emulin. This software works on PC and allows:
- the publishing of messaging files (LDF)
- the management of the various inpuit/output
- the information feedback on PC for visualization
The Diagnostic Tool Set (DTS) is used for the debugging of ECUs via a ISO 9141 diagnostic link. It supports protocols KWP2000, CARB and EOBD on a standard basis and manufacturers' protocols on option (BMW, OPEL, PSA, etc.).
It can create and run scenarios and spy on the ISO9141 link.
EDIC-PC3 and EDICcard are cards for PC ISA or PCMCIA buses. They allow communication with automobile equipment equipped with ISO 9141 diagnostic links. They manage one K line and one L line, or two K lines.They are used by DTS or the API module.
VANPC EXPERT smart cards (2 VAN channels) are used to connect systems equipped with a PC ISA or PCMCIA bus to the VAN network.These cards are supplied with software interfaces for Windows.In the analyser version, they are used by VANalyzer.
VAN cards for PC are used to connect systems equipped with a PC/ISA, PC/104 or PCMCIA bus to the VAN network.These cards are supplied with software interfaces for Windows.
Traminator VAN is VAN computer validation tool.It is used to generate interference controlled by a CAN bus: line breaking, connection to earth, transmission of error frames, destruction of bits, etc.
It can be used to generate errors on VCAN frames on demand: simultaneous interference on both differential lines or separately on each of the DATA and DATAB lines, destruction of bits, loss of arbitration, etc..
Power line transient phase simulation standThis stand records and analyses the behaviour of equipment in the event of a calibrated power line disturbance.It is used to check that computers comply with specification B21 7110.
TCR (Testeur de Conformité Réseau) is a network compliance tester used for the certification of layers 1 and 2 (physical and data link) of ECUs on CAN and VAN networks and ISO 9141 diagnostic links.
|
